Chapter 12 Replacing Or Adding Voice Processing Boards; Dsp Numbering And Location - Nortel CallPilot User Manual

Chapter 12
Replacing or adding voice processing
boards
In this chapter
"DSP numbering and location" (page 131)
"Replacing an MPB96 board" (page 132)

DSP numbering and location

DSPs are the built-in voice processing components on MPB boards. DSPs
are numbered to distinguish them in CallPilot maintenance programs, such
as the Maintenance page in CallPilot Manager. Each DSP supports up to
eight multimedia channels.
DSP numbering on MPB96 boards
The MPB96 board has 12 embedded DSPs. MPC-8 boards are not required.
If an embedded DSP is faulty, you must replace the entire MPB96 board.
Copyright © 2007, Nortel Networks
.
Nortel CallPilot
1002rp Server Maintenance and Diagnostics
NN44200-701 01.02 Standard
5.0 4 April 2007
131
Nortel Networks Confidential