Advance Setup Options; Figure 29 Menu 11.6 For Llc-Based Multiplexing Or Ppp Encapsulation; Figure 30 Menu 11.1 - Remote Node Profile - Nortel 252 Configuration

96 Chapter 6 Remote Node setup

Figure 29 Menu 11.6 for LLC-based Multiplexing or PPP Encapsulation

In this case, only one set of VPI and VCI numbers need be specified for all
protocols. The valid range for the VPI is 0 to 255 and for the VCI is 32 to 65535
(1 to 31 is reserved for local management of ATM traffic).

Advance Setup Options

In menu 11.1, select PPPoE in the Encapsulation field.
Figure 30 Menu 11.1 – Remote Node Profile
NN47923-501
Menu 11.6 - Remote Node ATM Layer Options
VPI/VCI (LLC-Multiplexing or PPP-Encapsulation)
VPI #= 8
VCI #= 35
ATM QoS Type= UBR
ENTER here to CONFIRM or ESC to CANCEL:
Menu 11.1 - Remote Node Profile
Rem Node Name= MyISP
Active= Yes
Encapsulation= PPPoE
Multiplexing= LLC-based
Service Name=
Incoming:
Rem Login=
Rem Password= ********
Outgoing:
My Login= ChangeMe
My Password= ********
Authen= CHAP/PAP
Press ENTER to Confirm or ESC to Cancel:
Route= IP
Bridge= No
Edit IP/Bridge= No
Edit ATM Options= No
Edit Advance Options= Yes
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Schedule Sets=
Nailed-Up Connection= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 0