Wizard Setup; Wizard Overview; Wizard Setup: General Setup And System Name - Nortel BSR222 Configuration

Chapter 3

Wizard setup

This chapter provides information on the Wizard screens in the WebGUI.

Wizard overview

The setup wizard in the WebGUI helps you configure your device to access the
Internet. The second screen has three variations, depending on which
encapsulation type you use. Refer to your ISP checklist in the Nortel Business
Secure Router 222 — Fundamentals (NN47922-301) to know what to enter in
each field. Leave a field blank if you do not have the required information.

Wizard setup: General Setup and System Name

General Setup contains administrative and system related information. System
Name is for identification purposes. However, because some ISPs check this
name, you must enter your Computer Name.
In Windows 95/98, click Start, Settings, Control Panel, Network. Click the
Identification tab, note the entry for the Computer Name field and enter it as the
System Name.
In Windows 2000, click Start, Settings, Control Panel and then double-click
System. Click the Network Identification tab and then the Properties button.
Note the entry for the Computer name field and enter it as the System Name.
In Windows XP, click Start, My Computer, View system information and then
click the Computer Name tab. Note the entry in the Full computer name field
and enter it as the Business Secure Router System Name.
Nortel Business Secure Router 222 Configuration — Basics
51