Nortel 252 Configuration page 282

282 Appendix G Command Interpreter
Table 67 IP commands
Command
dropIcmp
igmp
debug
forwardall
querier
iface
robustness
status
alg
display
siptimeout
NN47923-501
private <yes|no>
active <yes|no>
[0|1]
[level]
[on|off]
[on|off]
<iface> grouptm
<timeout>
<iface> interval
<interval>
<iface> join
<group>
<iface> leave
<group>
<iface> query
<iface> rsptime
[time]
<iface> start
<iface> stop
<iface> ttl
<threshold>
<iface> v1compat
[on|off]
<num>
<timeout in
second> or 0 for
no timeout
Description
Turns private mode on or off.
Enables or disables a static route rule.
Sets whether or not the device allows ICMP
fragment packets.
Sets IGMP debug level.
Activates or deactivates IGMP forwarding to
all interfaces flag.
Turns on or off IGMP stop query flag.
Sets IGMP group timeout for the specified
interface.
Sets IGMP query interval for the specified
interface.
Adds an interface to a group.
Removes an interface from a group.
Sends an IGMP query on the specified
interface.
Sets the IGMP response time.
Turns on IGMP on the specified interface.
Turns off IGMP on the specified interface.
Sets the IGMP Time To Live threshold.
Turns on or off IGMP version 1 compatibility
on the specified interface.
Sets the IGMP robustness variable.
Displays the IGMP status.
Shows whether the Application Layer
Gateway is enabled or disabled.
Sets the SIP timeout period.