Nortel 252 Configuration page 289

Table 68 IPSec commands
Command
sourceStart
sourceEnd
destStart
destEnd
save
btNatList
clientTerm
load
active
display
save
auth
<IP address>
<IP address>
<yes | no>
[user | cfg]
local <on |
off>
local psk <on |
off>
radius <on |
off>
radius groupId
radius groupPwd
radius psk <on
| off>
Nortel Business Secure Router 252 Configuration — Advanced
Appendix G Command Interpreter 289
Description
Sets the exempt host's source start IP
address.
Sets the exempt host's source end IP
address.
Sets the exempt host's destination start
IP address.
Sets the exempt host's destination end IP
address.
Saves an exempt host.
Displays the branch tunnel NAT entries.
Loads client termination configuration
from ROM to working buffer, you must
execute this command before configuring
client termination.
Enables or disables client termination.
Displays configuration and/or remote
user logon status of client termination,
unless a parameter is specified, displays
all.
Saves any client termination
configuration changes to ROM.
Enables or disables Local User Database
authentication method.
Enables or disables the Pre-Shared Key
authentication method for the Local User
Database.
Enables or disables the RADIUS Server
authentication method.
Configures Group ID fields for RADIUS
Server authentication method.
Configures Group Password fields for
RADIUS Server authentication method.
Enables or disables Pre-Shared Key
authentication type for RADIUS Server.