Nortel 252 Configuration page 270

270 Appendix G Command Interpreter
Table 64 Sys commands
Command
clear
display
errlog
load
mail
NN47923-501
urlblocked [0:none/1:log/
2:alert/3:both]
urlforward [0:none/1:log]
[access|attack|error|ike|i
psec|javablocked|mten|pack
etfilter|pki|
tcpreset|tls|upnp|urlblock
ed|urlforward]
clear
disp
online
alertAddr [mail address]
clearLog [0:no/1:yes]
display
logAddr [mail address]
schedule display
schedule hour [0-23]
schedule minute [0-59]
schedule policy [0:full/
1:hourly/2:daily/3:weekly/
4:none]
schedule week [0:sun/1:mon/
2:tue/3:wed/4:thu/5:fri/
6:sat]
server [domainName/IP]
Description
Records and/or sends alerts for web
access blocked logs.
Records web access forward logs.
Clears the log.
Displays all logs or specifies a category
of logs.
Clears the error log.
Displays the error log.
Turns the error log online display on or
off.
Loads the log settings buffer. Use this
command before you configure the log
settings. Use sys logs save after
you configure the log settings.
Sends alerts to this e-mail address.
Enables the switch to clear the log after
sending logs via e-mail.
Displays the logs and alerts mail
settings.
Sends logs to this e-mail address.
Displays the mail schedule.
Sets the hour to send logs.
Sets the minute to send the logs.
Sets the mail schedule policy.
Sets the day of the week to send
weekly logs.
Sets the domain name or IP address of
the mail server to which the logs are
sent.