Nortel 252 Configuration page 275

Table 64 Sys commands
Command
load
reserve
save
socket
filter
netbios
ddns
debug
display
restart
logout
cpu
display
[0:deny/1:permit]
disp
config <0:Between LAN and
WAN/ 3: IPSec Pass through/
4: Trigger Dial> <on|off>
<level>
<iface name>
Nortel Business Secure Router 252 Configuration — Advanced
Appendix G Command Interpreter 275
Description
Saves UPnP information.
Saves UPnP information.
Displays the system socket's ID #,
type, control block address (PCB), IP
address and port number of peer
device connected to the socket
(Remote Socket) and task control block
(Owner).
Displays the current NetBIOS filter
modes.
Sets NetBIOS filters.
Enables or disables DDNS service.
Displays DDNS information.
Restarts DDNS.
This command has no effect.
Displays the CPU utilization.