Syslog Logging; Figure 83 Menu 24.3 - System Maintenance: Log And Trace; Figure 84 Menu 24.3.2 - System Maintenance: Syslog Logging; Table 39 System Maintenance Menu Syslog Parameters - Nortel 252 Configuration

170 Chapter 14 System information and diagnosis
Figure 83 Menu 24.3 – System Maintenance: Log and Trace

Syslog logging

The Business Secure Router uses the syslog facility to log the CDR (Call Detail
Record) and system messages to a syslog server. Syslog and accounting can be
configured in Menu 24.3.2 - System Maintenance - Syslog Logging, as shown
in Figure
Figure 84 Menu 24.3.2 – System Maintenance: Syslog Logging
Configure the syslog parameters described in
choose what you want to log.

Table 39 System Maintenance Menu Syslog Parameters

Parameter
Syslog:
Active
NN47923-501
Menu 24.3 - System Maintenance - Log and Trace
2. Syslog Logging
4. Call-Triggering Packet
Press ENTER to Confirm or ESC to Cancel
84.
Menu 24.3.2 - System Maintenance - Syslog Logging
Syslog:
Active= No
Syslog Server IP Address= ?
Log Facility= Local 1
Press ENTER to Confirm or ESC to Cancel
Description
Press [SPACE BAR] and then [ENTER] to turn syslog on or off.
Table 39 to activate syslog, and then