Nortel 252 Configuration page 63

Table 10 Fields in Menu 11.2 Remote Node Profile (Backup ISP)
Field Description
Authen This field sets the authentication protocol used for
outgoing calls.
Options for this field are:
CHAP/PAP - Your Business Secure Router will accept
either CHAP or PAP when requested by this remote
node.
CHAP - accept CHAP only.
PAP - accept PAP only.
Pri Phone # Enter the first (primary) phone number from the ISP for
this remote node. If the Primary Phone number is busy
Sec Phone #
or does not answer, your Business Secure Router dials
the Secondary Phone number if available. Some areas
require dialing the pound sign # before the phone
number for local calls. Include a # symbol at the
beginning of the phone numbers as required.
Edit PPP Move the cursor to this field and use the space bar to
Options select [Yes] and press [Enter] to edit the PPP options for
this remote node. This brings you to Menu 11.2.1 -
Remote Node PPP Options
options").
Rem IP Addr Leave the field set to 0.0.0.0 (default) if the remote
gateway has a dynamic IP address. Enter the remote
gateway's IP address here if it is static.
Edit IP This field leads to a "hidden" menu. Press [SPACE BAR]
to select Yes and press [ENTER] to go to Menu 11.2.2 -
Remote Node Network Layer Options. Please
"Editing TCP/IP options"
Edit Script Press [SPACE BAR] to select Yes and press [ENTER]
Options to edit the AT script for the dial backup remote node
(Menu 11.2.3 - Remote Node Script). Please
"Editing logon script"
Telco Option
Allocated Enter the maximum number of minutes that this remote
Budget node may be called within the time period configured in
the Period field. The default for this field is 0 meaning
there is no budget control and no time limit for accessing
this remote node.
Period(hr) Enter the time period (in hours) for how often the budget
should be reset. For example, to allow calls to this
remote node for a maximum of 10 minutes every hour,
set the Allocated Budget to 10 (minutes) and the
Period to 1 (hour).
Nortel Business Secure Router 252 Configuration — Advanced
Chapter 3 WAN and Dial Backup Setup 63
(see "Editing PPP
for more information.
for more information.
Example
CHAP/PAP
No
(default)
0.0.0.0
(default)
No
(default)
see
No
(default)
see
0
(default)
0
(default)