Exit Command; Ethernet Commands; Table 65 Exit Command; Table 66 Ether Commands - Nortel 252 Configuration

276 Appendix G Command Interpreter

Exit Command

Table 65 Exit Command

Command
exit

Ethernet Commands

Table 66
must be preceded by
information on the LAN configuration.

Table 66 Ether Commands

Command
config
driver
cnt
status
version
edit
load
mtu
accessblock
speed
save
dynamic
Port
dump
NN47923-501
Description
Ends the command interpreter session.
lists and describes the Ethernet commands. Each of these commands
. For example, type
ether
disp <name>
<ch_name>
<1:LAN>
<value>
<0:disable 1:enable>
<auto|10/half|10/
full|100/half|100/
full>
ether config
Description
Displays LAN configuration information.
Displays the Ethernet driver counters.
Shows the LAN status.
Displays the Ethernet device type.
Loads Ethernet (1:LAN) data from the System
Parameters Table.
Sets the Ethernet data Maximum Transmission
Unit.
Blocks Internet access.
Sets the Ethernet data speed and duplex.
Saves Ethernet data to the System Parameters
Table.
Displays the relationship between physical port
and channel.
to display