Terminal Setup - Nortel 4500 Series Overview-System Configuration

2
3
4
5
6
7

Terminal setup

You can customize switch terminal settings to suit the preferences of a
switch administrator. You must perform this operation in the Command
Line Interface.
The terminal command configures terminal settings. These settings
include terminal length and terminal width.
The syntax of the terminal command is
terminal length
Copyright © 2007, Nortel Networks
.
Select the AsciiConfigFile tab. This tab is illustrated in
"AsciiConfigFile tab" (page
In the LoadServerAddr field, type the IP address of the desired
TFTP server.
In the AsciiConfigFilename field, type the name of the configuration
file to use.
From the AsciiConfigAutoDownload field, select the option to
specify how to download the configuration file:
• disabled: Disable automatic downloading.
• useBootp: Obtain the settings needed to connect to the TFTP
server that contains the configuration file. Using this option
overrides the value in the LoadServerAddr field.
• useConfig: Use the TFTP settings on the screen to connect to
the TFTP server.
Click Apply.
Click Refresh to check AsciiConfigAutoDldStatus field for automatic
download configuration file status.
The automatic download configuration file status can be one of the
following:
•
passed
• in progress
• failed
<0-132>
Nortel Ethernet Routing Switch 4500 Series
Overview — System Configuration
NN47205-500 02.01 Standard
5.0 23 February 2007
93).
—End—
width <1-132>
Terminal setup 103
Nortel Networks Confidential