Figure 22 Menu 11.1.2: Remote Node Network Layer Options For Ethernet Encapsulation; Table 16 Remote Node Network Layer Options Menu Fields - Nortel BCM50e Configuration

Figure 22 Menu 11.1.2: Remote Node Network Layer Options for Ethernet
Encapsulation
Press Space Bar to Toggle.
This menu displays the My WAN Addr field for PPPoE and PPTP
encapsulations and Gateway IP Addr field for Ethernet encapsulation.
Table 16

Table 16 Remote Node Network Layer Options Menu Fields

Field
IP Address
Assignment
(Rem) IP
Address
(Rem) IP
Subnet Mask
Menu 11.1.2 - Remote Node Network Layer Options
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Addr= N/A
Network Address Translation= SUA Only
Metric= N/A
Private= N/A
RIP Direction= None
Version= N/A
Multicast= None
Enter here to CONFIRM or ESC to CANCEL:
describes the fields in
Description
If your ISP did not assign you an explicit IP address, press
[SPACE BAR] and then [ENTER] to select Dynamic;
otherwise select Static and enter the IP address & subnet
mask in the following fields.
If you have a Static IP Assignment, enter the IP address
assigned to you by your ISP.
If you have a Static IP Assignment, enter the subnet mask
assigned to you.
Chapter 6 Remote Node setup 75
Figure 22.
BCM50e Integrated Router Configuration - Advanced
Example
Dynamic
(default)