Page 2
While the information in this document is believed to be accurate and reliable, except as otherwise expressly agreed to in writing NORTEL PROVIDES THIS DOCUMENT "AS IS" WITHOUT WARRANTY OR CONDITION OF ANY KIND, EITHER EXPRESS OR IMPLIED. The information and/or products described in this document are subject to change without notice.
New in this release See the following sections for details about what’s new in Nortel Secure Router 2330/4134 Installation — SFPs (NN47263-303) for release 10.2. Features No changes have been made to feature content for this release. Other changes This document is updated to include references to the new SR2330 hardware.
2330/4134 module that supports SFPs. The router supports the optical functions of the SFP. A future release will provide access to the DDI information. The following table lists and describes the Nortel SFP models with DDI capability. All these SFPs use LC connectors. Nortel Secure Router 2330/4134 Installation —...
Install an SFP to provide an interface between the switch and the network cable. Installing an SFP takes about three minutes. The Secure Router 2330/4134 supports the 1000BASE-SX (AA1419048-E6) and the 1000BASE-LX (AA1419049-E6) SFPs. For translations of the following messages, see “Product safety warnings...
• “1000BASE-LX DDI SFP specifications” (page 32) SFP labels The Nortel label on a typical SFP contains a Nortel serial number, a bar code, a manufacturer code, an interface type, and a part number. Nortel Secure Router 2330/4134 Installation — SFPs NN47263-303 03.01 7 September 2009...
While the information in this document is believed to be accurate and reliable, except as otherwise expressly agreed to in writing NORTEL PROVIDES THIS DOCUMENT "AS IS" WITHOUT WARRANTY OR CONDITION OF ANY KIND, EITHER EXPRESS OR IMPLIED. The information and/or products described in this document are subject to change without notice.
Need help?
Do you have a question about the 2330 and is the answer not in the manual?
Questions and answers