Figure 9 Menu 2 - Wan Setup; Table 6 Menu 2 Wan Setup - Nortel 252 Configuration

56 Chapter 3 WAN and Dial Backup Setup
Figure 9 Menu 2 – WAN Setup
Table 6

Table 6 Menu 2 WAN setup

Field
Route
Selection:
WAN Metric
Traffic Redirect
Metric
Dial Backup
Metric
NN47923-501
Menu 2 - WAN Setup
Route Selection:
WAN Metric= 1
Traffic Redirect Metric= 14
Dial Backup Metric= N/A
Edit Traffic Redirect= No
Dial-Backup:
Active= N/A
Port Speed= N/A
AT Command String:
Init= N/A
Edit Advanced Setup= N/A
Press ENTER to Confirm or ESC to Cancel:
describes the fields in
Description
The Business Secure Router uses the connection with
the lowest metric value first.
The default WAN connection is 1 as your broadband
connection through the WAN port must always be
your preferred method of accessing the WAN.
The default priority of the routes is WAN, Traffic
Redirect and then Dial Backup (dial backup does not
apply to all Business Secure Router models):
You have two choices for an auxiliary connection, in
the event that your regular WAN connection goes
down. If Dial Backup is preferred to Traffic Redirect,
then type 14 in the Dial Backup Metric field (and
leave the Traffic Redirect Metric at the default of 15).
Figure 9.
Example
1