Figure 22 Menu 4 - Internet Access Setup; Table 17 Menu 4 Internet Access Setup - Nortel 252 Configuration

82 Chapter 5 Internet access
Figure 22 Menu 4 – Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= ENET ENCAP
Multiplexing= LLC-based
VPI #= 8
VCI #= 35
My Login= N/A
My Password= N/A
ENET ENCAP Gateway= N/A
IP Address Assignment= Dynamic
IP Address= N/A
Network Address Translation= SUA Only
Address Mapping Set= N/A
Table 17

Table 17 Menu 4 Internet access setup

Field
ISP's Name
Encapsulation
Multiplexing
VPI #
VCI #
My Login
My Password
ENET ENCAP
Gateway
NN47923-501
Menu 4 - Internet Access Setup
Press ENTER to Confirm or ESC to Cancel:
describes the fields in
Description
Enter the name of your Internet Service Provider.
This information is for identification purposes only.
SPACE BAR
Press [
encapsulation used by your ISP. Choices are
PPPoE, PPPoA, RFC 1483, or ENET ENCAP.
SPACE BAR
Press [
multiplexing used by your ISP. Choices are
VC-based or LLC-based.
Enter the Virtual Path Identifier (VPI) that the
telephone company gives you.
Enter the Virtual Channel Identifier (VCI) that the
telephone company gives you.
Configure the My Login and My Password fields for
PPPoA and PPPoE encapsulation only. Enter the
username exactly as your ISP assigned.
Enter the password associated with the logon name
above.
Enter the gateway IP address supplied by your ISP
when you are using ENET ENCAP encapsulation.
Figure 22.
] to select the method of
] to select the method of
Example
ChangeMe
ENET ENCAP
LLC-based
8
35
N/A
N/A
N/A