Figure 3-16. Cluster Port Status Table And Prompt - Bay Networks 5380 User Manual

Cluster
--------
Changing cluster wrapping...
Enter cluster number (0 if done, 1 to 4): 2
Figure 3-16.
2.
3.
112768 Rev. B
Port Status
---------
1 Connected
2 Connected
3 Connected
4 Connected
Cluster Port Status Table and Prompt
Enter the cluster port number (interface 1, 2, 3, or 4) you want to
segment.
In the example shown in Figure 3-16, 2 is entered. The following prompt is
displayed:
Enter new port attachment (1 = wrapped, 0 = connected):
Enter a 1 to wrap the cluster port or a 0 to connect the cluster port.
The connections table is displayed to show the results of changes and prompts
for additional changes (see Figure 3-17).
Initializing and Setting Up the Routers
Ring Ring
Connection Speed
------------ -------
1 None
2 None
3 None
4 None
MAC Address
-----------------
00-00-A2-C5-AF-E2
00-00-A2-C5-AF-E3
00-00-A2-C5-AF-E4
00-00-A2-C5-AF-E5
3-23