Figure 3-3. Service Port Diagnostics Menu - Bay Networks 5380 User Manual

4.
*SERVICE PORT DIAGNOSTICS MENU*
c
t
e
q
Enter command:
Figure 3-3.
5.
112768 Rev. B
When you enter the slot number to connect to the router, the following prompt
is displayed:
Press CTRL-Y to begin
Press [Ctrl]+y.
The Service Port Diagnostics Menu is displayed (see Figure 3-3).
**********************************************************
Copyright (c) 1996
Bay Networks Inc.
All Rights Reserved.
Date: Wed Nov 8 12:33:04 EST 1996.
5380 Ethernet Router CMB Firmware V1.123
**********************************************************
Connections menu
Technician interface enable
Engineering diagnostics
Quit
Service Port Diagnostics Menu
If you want to return to the Slot Selection Menu, press [Ctrl]+t.
Press t to initialize the Technician Interface.
The following information is displayed:
Control transferred to Technician Interface
Enter ^X to return to CMB Interface
"CMB Interface" refers to the Service Port Diagnostics Menu for the common
management bus discussed earlier in these instructions.
Choice e is for use by trained service representatives.
Initializing and Setting Up the Routers
3-5