Figure 3-7. Summary Information For An Installation - Bay Networks 5380 User Manual

Using Model 5380 Ethernet and Model 5580 Token Ring Routers
Net Module:
Module Number:
Connector:
Slot:
Circuit Name:
IP address:
IP subnetwork mask:
Routing Protocol:
Default Rt. Listen:
TFTP Default Volume: 11:
FTP Default Volume:
TI TELNET:
NOTE: The Connector value in the above Configuration Summary
is the Connector number as seen on the
Note, however, that within the event log and the MIB browsing
utilities such as Site Manager's Quick Get and the Technician
Interface's debug scripts, connectors are numbered by a
combination of their Connector number and Module number. The
interface you have selected will henceforth be referred to
as Connector 34
Figure 3-7.
Note: If you terminate the installation script, reboot the router using the
ti_5000.cfg file before you rerun the installation script.
3-12
• Telnet (optional)
• Site Manager workstation address
Many steps in the installation script suggest default values that you can accept
or override. Some steps are optional for your network requirements.
The script displays a summary of the newly configured IP interface (see
Figure 3-7), and then prompts you to save the configuration to a file.
IQE
3
4
11
E1134
192.32.37.118
255.255.255.224
RIP
No
11:
Yes
Summary Information for an Installation
Configuration Summary
---------------------
5380 Module.
112768 Rev. B