Figure 2-4. Removing A Simm - Bay Networks 5380 User Manual

4.
Guide
notch
Figure 2-4.
112768 Rev. B
If you are replacing a SIMM, remove the SIMM already installed in the
socket (see Figure 2-4).
1
Pull tabs outward and
SIMM forward.
2
Remove SIMM
at a 90 angle. Pull up.
Removing a SIMM
Push gently outward on the spring latch at each end of the SIMM.
a.
When you release the SIMM from the spring latches, the SIMM ejects
from the locking studs and can be easily removed.
Lift the SIMM out of the socket.
b.
Place the SIMM in an antistatic bag, or set it on an antistatic mat.
c.
Installing the Routers
6695
2-7