Figure 2-3. Installing A Simm - Bay Networks 5380 User Manual

Using Model 5380 Ethernet and Model 5580 Token Ring Routers
3.
Guide
notch
Figure 2-3.
2-6
Install the new or replacement SIMM (see Figure 2-3).
1
Insert SIMM at a 90
angle. Press down.
2
Press back, until SIMM
snaps into place.
Installing a SIMM
Note the location of the guides in the socket.
a.
Hold the SIMM you are installing by its top corners, and align the
b.
SIMM with the socket. Slide the SIMM gently into the socket.
Press down on the SIMM gently to seat it firmly in the socket,
c.
bringing the SIMM to its locked position. You may hear a "click" as
the spring latches engage the ends of the SIMM.
Caution: You may feel a slight resistance as the SIMM locks into
position. If the SIMM does not lock, do not force it. It is very easy to
damage the SIMM socket. Remove the SIMM, reinsert it, wiggle it
gently as you press it into the socket.
6696
112768 Rev. B