Using Model 5380 Ethernet and Model 5580 Token Ring Routers
5.
Figure 2-5.
Installing the Memory Card
The Model 5380 Ethernet Router and Model 5580 Token Ring Router use a
memory card to provide storage for the router nonvolatile file system (NVFS).
When you remove a formatted memory card, the NVFS removes access to the
card. When you insert and format a card (or insert a formatted card), the NVFS
automatically provides access to the card. For the router to boot, it needs a
memory card with a valid boot image and configuration file.
2-8
Place the DRAM size identification label on the PPX connector (P1). See
Figure 2-5.
The connector is labeled P1 on the baseboard.
The label indicates one of the following DRAM sizes:
•
8 Meg DRAM
•
16 Meg DRAM
•
32 Meg DRAM
Place label
on connector
SIMM sockets
Placing the DRAM Identification Label
8 Meg DRAM
8 Meg DRAM
6697.1
112768 Rev. B