Setting and Viewing Router Interfaces
You can set the four interfaces on a router module or view current configuration
and parameter settings by using the Service Port Diagnostics Menu.
Ethernet Router Settings
To view router interface settings:
1.
2.
*CONNECTION DIAGNOSTICS MENU*
c
s
a
p
g
-ESC
Enter command:
Figure 3-8.
112768 Rev. B
Connect to the slot in which the router module is installed and display the
Service Port Diagnostics Menu as described in "Connecting a Router
Module," earlier in this chapter.
Press c.
The Connection Diagnostics Menu for the Ethernet router is displayed (see
Figure 3-8).
show Connections
change cluster Segmentation
change backplane Attachments
display ethernet Port statistics
display ethernet Group statistics
Return to main menu
Connection Diagnostics Menu
Initializing and Setting Up the Routers
3-15