Figure 3-6. Beginning Of The Installation; Ip Routing Protocol - Bay Networks 5380 User Manual

More Mode: OFF
Lines per screen: 24
-------------------------------------------------------------------------------
-----------------------------------------------------------------
This part of the Quick-Start procedure configures the initial IP
network interface on the router.
the router can communicate with the network management station
Each step of this procedure is further described in the Quick-Start Guide.
As you perform the procedure, refer to the Quick-Start Guide for
additional helpful information and examples.
When you are finished with this procedure, the router will be able to
communicate with the network management station over the IP network.
are then ready to install the network management software, as described in
in the Quick-Start Guide.
Each procedure step requires you to do one of the following things:
You must press the <Return> key after entering one of the above responses.
Press <Return> to Continue, q<Return> to Quit:
Figure 3-6.
3.
112768 Rev. B
The installation script begins and displays the startup banner and the
introduction (see Figure 3-6).
#### # # #
# # # # # #
#### # # #
# # ##### #
#### # # #
### # # ###
# # # #
# # # #
# # # # #
### #### ###
#
1. Enter a number that corresponds to a selection.
2. Enter 'y' for Yes;
3. Enter a word or phrase referred to as a "text string"
4. Enter <Return> to accept default displayed in [].
Beginning of the Installation
Enter the network information as you are prompted.
Refer to your Network Information Worksheet as you proceed through the
script. See Appendix D, "Sample Installation Scripts" for an example of a
script. The script prompts you to enter the following information:
• The physical connector
• IP interface configuration
•

IP routing protocol

• TFTP and FTP default volumes
Initializing and Setting Up the Routers
# # #### ##### #
## # # # #
# # # ### # #
# ## # # # # # # #
# # #### #
## # # ### #####
# # # # #
# # ## ### ###
# # # # #
## # # ###
Version 1.X
Copyright 1993-1996
Introduction
------------
You perform this procedure so that
'n' for No; 'q' for Quit.
# ## ### # #
# # # # # # # #
# # # # ### ##
# # # # #
# # ## # # # # ###
# ### #####
# # # # # #
# # # ### #
# ##### # # #
# # # # # #
###
###
#
You
3-11