Figure 2-11. Inserter/Extractor Levers In The Vertical Position - Bay Networks 5380 User Manual

Caution: If you are hot-swapping router modules, make sure you are
replacing the module with the same model as the router you removed. If not,
the network may not resume operation.
3.
Figure 2-11.
4.
5.
112768 Rev. B
Extend the module inserter/extractor levers to the vertical position (see
Figure 2-11).
Inserter/Extractor Levers in the Vertical Position
Align the top and bottom edges of the metal printed circuit board carrier
with the slot card guides at the top and bottom of the slot.
Slide the module into the chassis until you feel it engage the backplane.
The inserter/extractor levers should still be in the vertical position and in
contact with the front of the chassis. Do not push the module all the way into
the chassis.
Installing the Routers
4689
2-13