System Configuration Settings - Graco Reactor 2 E-30 Operation

USB Data
Job Job Log Job Log Log
The job log file name is 2–JOB.CSV and is stored
in the DATAxxxx folder.
The job log maintains a record of data points
based on the USB Log Frequency defined
in the Setup screens. The ADM stores the
last 237,000 data points for download. See
Setup - Advanced Screen 3 — USB, page
information on setting the Download Depth and
USB Log Frequency.
• Data point date
• Data point time
• A side temperature
• B side temperature
• Hose temperature
• A side temperature setpoint
• B side temperature setpoint
• Hose temperature setpoint
• A side inlet pressure
• B side inlet pressure
• Inlet pressure setpoint
• System lifetime pump cycle counts
• Pressure, volume, and temperature units
• Job name/number
Daily Log Log
Daily Daily Log
The daily log file name is 3–DAILY.CSV and is
stored in the DATAxxxx folder.
The daily log maintains a record of the total
cycle and volume sprayed on any day that the
system is powered up. The volume units will be
the same units that were used in the Job Log.
The following data is stored in this file:
• Date that material was sprayed
• Time — unused column
• Total pump cycle count for day
• Total volume sprayed for day
70
System Software System System Software Log Software
The system software file name is 4–SYSTEM.CSV
and is stored in the DATAxxxx folder.
The system software log lists the following:
• Date log was created
• Time log was created
35, for
• Component name
• Software version loaded on the above
component
Blackbox Log
Blackbox Blackbox
The black box file name is 5–BLACKB.CSV and is
stored in the DATAxxxx folder.
The Blackbox log maintains a record of how the
system runs and the features that are used. This
log will help Graco troubleshoot system errors.
Diagnostics Diagnostics Log Diagnostics
The diagnostics file name is 6–DIAGNO.CSV and
is stored in the DATAxxxx folder.
The Diagnostics log maintains a record of how
the system runs and the features that are used.
This log will help Graco troubleshoot system
errors.
System Configuration
System System
The system configuration settings file name is
SETTINGS.TXT and is stored in the DOWNLOAD
folder.
A system configuration settings file
automatically downloads each time a USB flash
drive is inserted into the ADM. Use this file to
back up system settings for future recovery or to
easily replicate settings across multiple systems.
Refer to the
instructions on how to use this file.
Log Log
Log File File
Log File
Log File Log File File
Configuration Settings Settings
Configuration Settings
Upload Procedure, page 71 for
333023U