Graco Reactor 2 E-30 Operation page 40

Advanced Display Module (ADM) Operation
Home Home Home Screen Screen Screen - - - System System With System
Active errors are shown in the status bar. The
error code, alarm bell, and description of the
error will scroll in the status bar.
1. Press to acknowledge the error.
2. See for corrective action.
Targets Screen Screen
Targets Targets Screen
Use this screen to define the setpoints for
the A Component Temperature, B Component
Temperature, heated hose temperature, and
pressure.
Maximum Maximum A A A and Maximum and B B B temperature: and temperature: 190°F (88°C) temperature:
Maximum Maximum heated Maximum heated hose heated hose temperature: hose
above the highest A or B temperature setpoint
or 180°F (82°C).
NOTE: If the remote display module kit is used,
NOTE: NOTE:
these setpoints can be modified at the gun.
40
With Error With Error Error
temperature: 10°F (5°C) temperature:
Maintenance Screen Maintenance Maintenance Screen Screen
Use this screen to view daily and lifetime cycles
or gallons that have been pumped and gallons
or liters remaining in the drums.
The lifetime value is the number of pump cycles
or gallons since the first time the ADM was
turned on.
The daily value automatically resets at midnight.
The manual value is the counter that can be
manually reset. Press
manual counter.
Cycles Screens Screens
Cycles Cycles Screens
This screen shows daily cycles and gallons that
have been sprayed for the day.
All information listed on this screen can
be downloaded on a USB flash drive. See
Download Procedure, page
and hold to reset
69.
333023U