Approvals - Graco Reactor 2 E-30 Operation

Approvals

Reactor 2 2 2 E E E - - - XP2i XP2i Elite
Reactor Reactor XP2i
All base systems include fluid inlet pressure and temperature sensors and Graco InSite
numbers, see
Model Model Model
Base Base Base Machine Machine Machine
Maximum Fluid Fluid Working Working
Maximum Maximum Fluid Working
Pressure Pressure psi Pressure psi (MPa, psi (MPa, bar) (MPa, bar) bar)
Approximate Approximate Output Approximate Output per Output
(A+B) gal. gal. (liter) (liter)
(A+B) (A+B) gal. (liter)
Max Max Max Flow Flow Rate Flow Rate Rate lb/min lb/min lb/min (kg/min)
Total Total System Total System Load System Load † † † (Watts) Load
Voltage (phase) (phase)
Voltage Voltage (phase)
Available Available Available Auxiliary Auxiliary Current Auxiliary Current at at at Current
Volts, Volts, 60 Volts, 60 Hz* 60 Hz*H H H Hz*
Fusion Fusion Fusion AP AP AP Package Package Package 6
(Gun Part No.)
Probler P2 P2 Package Package 6
Probler Probler P2 Package
(Gun Part No.)
Heated Hose Hose
Heated Heated Hose
50 50 50 ft ft ft (15 (15 m) (15 m) m)
Heated Heated Heated Whip Whip Hose Whip Hose Hose
10 ft ft ft (3 (3 (3 m) m)
10 10 m)
=
Total system watts used by system, based on
maximum heated hose length of 310 ft (94.5
m) for each unit.
*
Full load amps available for auxiliary
equipment when all bare-system components
are operating at maximum capabilities.
Available auxiliary current is based on 310
ft (94.5 m) of heated hose. An additional
3.0 amps (240 VAC) of auxiliary current is
available for each 50 ft (15.2 m) section of
heated hose that is not used.
Auxiliary current at 120 VAC is available on
line 1 (circuit breaker pin 2), line 2 current
at 120 VAC is used by the air dryer (circuit
breaker pin 4).
H
Available auxiliary current will be less when
the engine is de-rated for site altitude.
Reduce the Available Auxiliary Current in the
chart by 2.5 Amps (240 VAC) per 1000 ft
(300 m) elevation increments. If the available
auxiliary current is less than zero, the system
configuration may not support the full load
at that altitude.
u
Includes Complete Air Compressor/Dryer Kit
24U176.
6 Packages include gun, heated hose, and whip
hose. See Approvals.
10
Elite
Elite
No Air Air Compressor/Dryer
No No Air
E E E - - - XP2i XP2i with with heat
XP2i with
272081
3500 (24.1, 241)
per per Cycle Cycle Cycle 0.0272 (0.1034)
(kg/min) (kg/min) 30 (13.5)
(Watts) (Watts) 11,600
240 VAC (1)
35 Amps (240)
AP2081
(246100)
P22081
(GCP2R0)
24Y241
246055
Compressor/Dryer
Compressor/Dryer
heat
heat
Approvals Approvals Approvals
Intertek approvals apply to proportioning
systems without hoses.
Model
Model Model
272079
272080
272081
Conforms to UL Std. 499 Certified
272089
272090
272091
Note
Heated hoses provided with a system
or sold individually are not approved by
Intertek.
™
u u u With With Air With Air Air Compressor/Dryer Compressor/Dryer Compressor/Dryer
E E E - - - XP2i XP2i with with heat heat
XP2i with heat
272091
3500 (24.1, 241)
0.0272 (0.1034)
30 (13.5)
17,700
240 VAC (1)
5 Amps (240)
9 Amps (120)
AP2091
(246100)
P22091
(GCP2R0)
24Y241
246055
Proportioning System System Approvals:
Proportioning Proportioning System
9902471 9902471 9902471
to CAN/CSA Std. C22.2 No. 88
. For part
Approvals:
Approvals:
333023U