13. Set the PRESSURE RELIEF/SPRAY valves (SA,
SB) to PRESSURE RELIEF/CIRCULATION
333023U
14. Listen for a "spitting" sound from the bleed
lines (N) or recirculation lines (R). See
Typical Installation, without circulation, page
.
13,
Typical Installation, with system fluid
manifold to drum circulation, page
Typical Installation, with gun fluid manifold
to drum circulation, page
indicates that the Reactor 2 system still
contains unwanted air. If the system still
contains air, repeat the purge air procedure.
Spraying
14, and
15. This sound
61