Models - Graco Reactor 2 E-30 Operation

Models

Models Models
Reactor Reactor 2 2 2 E E E - - - 30i Reactor 30i 30i Elite
All base systems include fluid inlet pressure and temperature sensors and Graco InSite
numbers, see
Model Model Model
E E E - - - 30i
Base Machine Machine 272079
Base Base Machine
Maximum Maximum Maximum Fluid Fluid Fluid 2000 (13.8, 138)
Working Pressure Pressure
Working Working Pressure
psi psi psi (MPa, (MPa, bar) (MPa, bar) bar)
Approximate Approximate Approximate
0.0272 (0.1034)
Output per per Cycle Cycle
Output Output per Cycle
(A+B) (A+B) gal. (A+B) gal. (liter) gal. (liter) (liter)
Max Flow Flow Rate Rate 30 (13.5)
Max Max Flow Rate
lb/min lb/min lb/min (kg/min) (kg/min) (kg/min)
Total Total Total System System System Load Load Load 7,400
† † † (Watts) (Watts)
(Watts)
Voltage Voltage Voltage (phase) (phase) (phase) 240 VAC (1)
Available Available Auxiliary Available Auxiliary Auxiliary 52 Amps (240)
Current at at at Volts, Volts,
Current Current Volts,
60 60 60 Hz* Hz*H H H Hz*
Fusion AP AP Package Package AP2079
Fusion Fusion AP Package
(246102
6
)
(Gun Part No.)
Fusion CS CS Package Package CS2079
Fusion Fusion CS Package
(CS02
6
RD)
(Gun Part No.)
Probler P2 P2 Package Package P22079
Probler Probler P2 Package
(GCP2R2
6
)
(Gun Part No.)
24Y240
Heated Heated Hose Heated Hose Hose
50 50 ft ft ft (15 50 (15 m) (15 m) m)
Qty: 1
Qty: Qty:
24Y240 (Xtreme-
Wrap)
Heated Whip Whip Hose Hose 246050
Heated Heated Whip Hose
10 10 ft ft ft (3 (3 (3 m) 10 m) m)
=
Total system watts used by system, based on
maximum heated hose length of 310 ft (94.5
m) for each unit.
*
Full load amps available for auxiliary
equipment when all bare-system components
are operating at maximum capabilities.
Available auxiliary current is based on 310
ft (94.5 m) of heated hose. An additional
3.0 amps (240 VAC) of auxiliary current is
available for each 50 ft (15.2 m) section of
heated hose that is not used.
Auxiliary current at 120 VAC is available on
line 1 (circuit breaker pin 2), line 2 current
at 120 VAC is used by the air dryer (circuit
breaker pin 4).
333023U
Elite Elite
No Air Air Compressor/Dryer Compressor/Dryer
No No Air Compressor/Dryer
30i
30i E E E - - - 30i 30i with 30i
272080
2000 (13.8, 138)
0.0272 (0.1034)
30 (13.5)
11,600
240 VAC (1)
35 Amps (240)
AH2079 AP2080
(246102 (246102
) )
CH2079 CS2080
(CS02 (CS02
RD) RD)
PH2079 P22080
(GCP2R2 (GCP2R2
) )
24Y240 24Y240
Qty: 5 Qty: 1
Qty: Qty: Qty: Qty:
246050 246050 246050
u u u With With Air With
E E E - - - 30i 30i
with heat with heat heat 30i
272089
2000 (13.8, 138)
0.0272 (0.1034)
30 (13.5)
13,500
240 VAC (1)
22 Amps (240)
9 Amps (120)
AH2080 AP2089
(246102 (246102
) )
CH2080 CS2089
(CS02 (CS02
RD) RD)
PH2080 P22089
(GCP2R2 (GCP2R2
) )
24Y240 24Y240
Qty: 5 Qty: 1
Qty: Qty: Qty: Qty:
246050
H
Available auxiliary current will be less when
the engine is de-rated for site altitude.
Reduce the Available Auxiliary Current in the
chart by 2.5 Amps (240 VAC) per 1000 ft
(300 m) elevation increments. If the available
auxiliary current is less than zero, the system
configuration may not support the full load at
that altitude.
u
Includes Complete Air Compressor/Dryer Kit
24U176.
6 Packages include gun, heated hose, and whip
hose. See Approvals.
™ . For part
Air Compressor/Dryer Air Compressor/Dryer Compressor/Dryer
E E E - - - 30i 30i with 30i with heat with
272090
2000 (13.8, 138)
0.0272 (0.1034)
30 (13.5)
17,700
240 VAC (1)
5 Amps (240)
9 Amps (120)
AH2089 AP2090 AH2090
(246102 (246102 (246102
) ) )
CH2089 CS2090 CH2090
(CS02 (CS02 (CS02
RD) RD) RD)
PH2089 P22090 PH2090
(GCP2R2 (GCP2R2 (GCP2R2
) ) )
24Y240 24Y240 24Y240
Qty: 5 Qty: 1 Qty: 5
Qty: Qty: Qty: Qty: Qty: Qty:
246050 246050 246050
Models
heat heat
9