Graco Reactor 2 E-30 Operation page 33

Setup Mode Mode
Setup Setup Mode
The ADM will start in the Run screens at the Home screen. From the Run screens, press
access the Setup screens. The system defaults with no password, entered as 0000. Enter the current
password then press
Setup Screens Navigation
Set Password Password
Set Set Password
Set a password to allow Setup screen access, see
number from 0001 to 9999. To remove the password, enter the current password in the Advanced
Screen – General screen and change the password to 0000.
From the Setup screens, press
333023U
. Press
Diagram.
to return to the Run screens.
Advanced Display Module (ADM) Operation
to navigate through the Setup Mode screens. See
Advanced Screen 1 – General, page
to
35. Enter any
33