Usb Logs; System Settings File - Graco Therm-O-Flow 200 Instructions-Parts List Manual

11. Remove USB flash drive from USB port.
NOTE: If a custom language file was installed, users
can now select the new language from the Language
drop-down menu.
NOTE: If the SETTINGS.TXT or DISPTEXT.TXT files
remain in the UPLOAD folder, they will be uploaded
every time the USB drive is inserted into the
corresponding ADM. To avoid unintentionally
overwriting system settings, delete the files from the
UPLOAD folders on the USB drive after the upload is
complete.

USB Logs

During operation, the Therm-O-Flow stores system and
performance related information to memory in the form
of log files. The Therm-O-Flow maintains the events,
data, GCA, Black Box, and Diagnostics logs. Follow the
Download Procedure, page 112, to retrieve log files.
Events Log
The event log (1-EVENT.CSV) maintains a record of the
last 175,000 events. Each event record in the log file
contains the date and time the event occurred, the
event type, event code, and event description.
Data Log
The data log (2-DATA.CSV) tracks the setpoint and
actual temperatures every 15 seconds. This log can
store up to 250,000 lines of data.
The system stores 1041 hours of system operation
data, or 43 days of around-the-clock operation. Once
full, the system will overwrite the oldest data.
334130W
Change Log
The change log (3–CHANGE.CSV) tracks the changes
to setpoint and setback temperatures.
GCA Log
This log (4-GCA.CSV) lists the installed GCA modules
and their respective software versions.
Black Box, Diagnostics Log
These logs (5-BLACKB.CSV, 6-DIAGN.CSV) are
designed to provide useful information to Graco when
calling for technical assistance.

System Settings File

NOTICE
Uploading an edited system configuration file can
damage the system. Never put a modified
SETTNGS.TXT file in the UPLOAD folder on the
flash drive.
The system configuration settings file name is
SETTINGS.TXT and is stored in the DOWNLOAD folder.
A system configuration settings file automatically
downloads each time a USB flash drive is inserted. Use
this file to back up system settings for future recovery
or to easily replicate settings across multiple
Therm-O-Flow systems. Refer to the Upload
Instructions, page 112, for how to use this file.
It is recommended to retrieve the SETTINGS.TXT file
after all system settings are set as desired. Store the file
for future use as a backup in case the settings are
changed and need to be quickly changed back to the
desired setup.
Appendix B - USB Data
113