Errors; View Errors; Troubleshoot Errors - Graco Reactor 2 E-30 Operation

Errors

Errors Errors

View Errors

Errors
View View Errors
When an error occurs the error information
screen displays the active error code and
description.
The error code, alarm bell, and active errors will
scroll in the status bar. For a list of the ten most
recent errors see Troubleshooting, page
Error codes are stored in the error log and
displayed on the Error and Troubleshooting
screens on the ADM.
There are three types of errors that can occur.
Errors are indicated on the display as well as by
the light tower (optional).
Alarms are indicated by
indicates a parameter critical to the process has
reached a level requiring the system to stop.
The alarm needs to be addressed immediately.
Deviations are indicated by
indicates a parameter critical to the process
has reached a level requiring attention, but not
sufficient enough to stop the system at this
time.
Advisories are indicated by
indicates a parameter that is not immediately
critical to the process. The advisory needs
attention to prevent more serious issues in the
future.
To diagnose the active error, see
Troubleshoot Errors, page
333023U
68.
. This condition
. This condition
. This condition
67.

Troubleshoot Errors

Errors
Troubleshoot Troubleshoot Errors
To troubleshoot the error:
1. Press the soft key next to "Help With This
Error" for help with the active error.
NOTE: NOTE: Press NOTE:
previously displayed screen.
2. The QR code screen will be displayed. Scan
the QR code with your smart phone to be
sent directly to online troubleshooting for
the active error code. Otherwise, manually
navigate to help.graco.com and search for
the active error.
3. If no internet connection is available, see
Error Codes and Troubleshooting, page
68 for causes and solutions for each error
code.
Errors
or to return to the
67