Disable Hose Resistance Mode; Enable Hose Manual Mode - Graco Reactor 2 E-30 Operation

Spraying
Disable Hose Hose Resistance Resistance Mode
Disable Disable Hose Resistance
1. Enter Setup Mode.
2. Navigate to System screen 3.
3. Set the Hose Control Mode to FTS.
Enable Hose Hose Manual Manual Mode
Enable Enable Hose Manual
1. Enter Setup Mode and navigate to System
Screen 3
54
Mode
Mode
Mode
Mode
2. Set the Hose Control Mode to Manual.
NOTE: When manual hose mode is enabled,
NOTE: NOTE:
the manual hose mode advisory EVCH-V will
appear.
3. Enter Run Mode and navigate to the Target
screen. Use the up and down arrows to set
the desired hose current.
Hose Hose Current Hose Current Current
Settings Settings Settings
Default
Maximum
Hose Current Hose Hose Current Current
20A
37A
333023U