Graco Reactor 2 E-30 Operation page 5

THERMAL EXPANSION
THERMAL THERMAL
Fluids subjected to heat in confined spaces, including hoses, can create a rapid rise in
pressure due to the thermal expansion. Over-pressurization can result in equipment
rupture and serious injury.
• Open a valve to relieve the fluid expansion during heating.
• Replace hoses proactively at regular intervals based on your operating conditions.
PRESSURIZED ALUMINUM
PRESSURIZED PRESSURIZED
Use of fluids that are incompatible with aluminum in pressurized equipment can cause
serious chemical reaction and equipment rupture. Failure to follow this warning can
result in death, serious injury, or property damage.
• Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated
hydrocarbon solvents or fluids containing such solvents.
• Do not use chlorine bleach.
• Many other fluids may contain chemicals that can react with aluminum. Contact
your material supplier for compatibility.
PLASTIC PARTS
PLASTIC PLASTIC
Many solvents can degrade plastic parts and cause them to fail, which could cause
serious injury or property damage.
• Use only compatible solvents to clean plastic structural or pressure-containing parts.
Technical Specifications
• See Technical Technical
of construction. Consult the solvent manufacturer for information and
recommendations about compatibility.
333023U
WARNING WARNING WARNING
EXPANSION HAZARD HAZARD
EXPANSION HAZARD
ALUMINUM PARTS PARTS HAZARD
ALUMINUM PARTS
PARTS CLEANING CLEANING SOLVENT SOLVENT HAZARD
PARTS CLEANING SOLVENT
Specifications in all equipment instruction manuals for materials
Specifications
HAZARD
HAZARD
HAZARD
HAZARD
Warnings
5