Graco Reactor 2 E-30 Operation page 39

Home Home Screen Home Screen — — — System Screen System Off System
This is the home screen when the system is off.
This screen displays actual temperatures, actual
pressures at the fluid manifold, jog speed, and
number of cycles.
333023U
Off Off
Advanced Display Module (ADM) Operation
Home Screen Home Home Screen — — — System Screen System Active System
When the system is active, the home screen
displays actual temperature for heat zones,
actual pressures at the fluid manifold, coolant
temperature, jog speed, the number of cycles,
along with all associated control soft keys.
Use this screen to turn on heat zones, view
coolant temperature, start the proportioner,
stop the proportioner, park the component A
pump, enter jog mode, and clear cycles.
NOTE: NOTE: NOTE: The screen shown displays inlet sensor
temperatures and pressures. These will not be
shown on models without inlet sensors.
NOTE: The screen shown displays flow bars and
NOTE: NOTE:
the flow ratio. The vertical bars indicate the
level of flow through the meters. The numerical
ratio indicates the ratio of A-side component
to B-side component (ISO : RES). For example,
if the ratio is 1.10 : 1, the proportioner is
pumping more A-side component (ISO) than
B-side component (RES). If the ratio is 0.90 :
1, the proportioner is pumping more B-side
component (RES) than A-side component (ISO).
Active Active
39