Liquid (Tsl); Install Fluid Temperature Sensor - Graco Reactor 2 E-30 Operation

Setup
Supply Wet Wet Cups Cups With
Supply Supply Wet Cups

Liquid (TSL)

(TSL)
Liquid Liquid (TSL)
Pump rod and connecting rod move during
operation. Moving parts can cause serious
injury such as pinching or amputation. Keep
hands and fingers away from wet-cup during
operation.
To prevent the pump from moving, turn the
main power switch OFF.
• Component Component A A A (ISO) Component (ISO) Pump: (ISO)
(R) filled with Graco Throat Seal Liquid (TSL),
Part 206995. Wet-cup piston circulates TSL
through wet-cup, to carry away isocyanate
film on displacement rod.
Figure 9 Component A Pump
30
With Throat Throat Seal Seal
With Throat Seal
Pump: Keep reservoir Pump:
Component B B B (Resin) (Resin) Pump:
• Component Component (Resin)
washers in packing nut/wet-cup (S) daily.
Keep saturated with Graco Throat Seal Liquid
(TSL), Part No. 206995, to prevent material
from hardening on displacement rod. Replace
felt washers when worn or contaminated with
hardened material.
Figure 10 Component B Pump
Install Fluid Install Install Fluid Temperature Fluid Temperature Sensor Temperature
The Fluid Temperature Sensor (FTS) is supplied.
Install FTS between main hose and whip hose.
See Heated Hose manual for instructions.
Pump: Check felt
Pump:
Sensor Sensor
333023U