Advanced Setup Screens - Graco Reactor 2 E-30 Operation

Advanced Setup Setup Screens
Advanced Advanced Setup
Advanced setup screens enable users to set
units, adjust values, set formats, and view
software information for each component. Press
to scroll through the Advanced
setup screens, Once in the desired Advanced
setup screen, press
make changes. When changes are complete
press to exit edit mode.
NOTE: Users must be out of edit mode to scroll NOTE: NOTE:
through the Advanced setup screens.
Advanced Screen Screen 1 1 1 — — — General
Advanced Advanced Screen
Use this screen to set the language, date format,
current date, time, setup screens password
(0000 – for none) or (0001 to 9999), and screen
saver delay (zero disables the screen saver).
Advanced Screen Screen 2 2 2 — — — Units
Advanced Advanced Screen
Use this screen to set the temperature units,
pressure units, volume units, and cycle units
(pump cycles or volume).
333023U
Screens
Screens
to access the fields and
General
General
Units
Units
Advanced Display Module (ADM) Operation
Advanced Screen Advanced Advanced Screen Screen 3 3 3 — — — USB
Use this screen to enable USB
downloads/uploads, enable a logs 90%
full advisory, enter the maximum number of
days to download data, enable specifying date
range of data to download, and how frequently
USB logs are recorded. See
Advanced Screen Advanced Advanced Screen 4— Screen
This screen displays the software part number.
The software versions of the Advanced Display
Module, Motor Control Module, Temperature
Control Module, USB Configuration, Load Center,
and Remote Display Module can be found by
pressing the search soft key
USB USB
USB Data, page
4— Software 4— Software Software
.
69.
35