Default Configuration - Analog Devices ADSP-BF561 EZ-KIT Lite Manual

Example programs
ADSP-BF561 EZ-KIT Lite Evaluation System Manual (this
document)
• Universal 7V DC power supply
• USB 2.0 cable
If any item is missing, contact the vendor where you purchased your
EZ-KIT Lite or contact Analog Devices, Inc.

Default Configuration

The EZ-KIT Lite evaluation system contains ESD (electrostatic dis-
charge) sensitive devices. Electrostatic charges readily accumulate
on the human body and equipment and can discharge without
detection. Permanent damage may occur on devices subjected to
high-energy discharges. Proper ESD precautions are recommended
to avoid performance degradation or loss of functionality. Store
unused EZ-KIT Lite boards in the protective shipping package.
The ADSP-BF561 EZ-KIT Lite board is designed to run outside your per-
sonal computer as a stand-alone unit. You do not have to open your
computer case.
When removing the EZ-KIT Lite board from the package, handle the
board carefully to avoid the discharge of static electricity, which may dam-
age some components.
switch, connector locations, and LEDs used in installation. Confirm that
your board is set up in the default configuration before using the board.
ADSP-BF561 EZ-KIT Lite Evaluation System Manual
www.BDTIC.com/ADI
Using ADSP-BF561 EZ-KIT Lite
Figure 1-1 shows the default jumper settings, DIP
1-3