Purpose Of This Manual; Intended Audience - Analog Devices ADSP-BF561 EZ-KIT Lite Manual

Purpose of This Manual

The parallel peripheral interfaces (PPIs) of the processor connect to both a
video encoder and video decoder, facilitating creation of video signal pro-
cessing applications. For information on how the board utilizes the
processor's PPIs, see
The UART of the processor connects to an RS-232 line driver and a DB9
male connector, allowing you to interface with a PC or other serial device.
For information about the UART, see
Additionally, the EZ-KIT Lite board provides access to most of the pro-
cessor's peripheral ports. Access is provided in the form of a
three-connector expansion interface. For information about the expansion
interface, see "Expansion Interface" on page
Purpose of This Manual
The ADSP-BF561 EZ-KIT Lite Evaluation System Manual provides
instructions for installing the product hardware (board). The text
describes operation and configuration of the board components and pro-
vides guidelines for running your own code on the ADSP-BF561 EZ-KIT
Lite. Finally, a schematic and a bill of materials are provided as a reference
for future designs.
The product software installation is detailed in the VisualDSP++ Installa-
tion Quick Reference Card.

Intended Audience

The primary audience for this manual is a programmer who is familiar
with Analog Devices processors. This manual assumes that the audience
has a working knowledge of the appropriate processor architecture and
instruction set. Programmers who are unfamiliar with Analog Devices
processors can use this manual but should supplement it with other texts
xii
www.BDTIC.com/ADI
"PPI Interfaces" on page
ADSP-BF561 EZ-KIT Lite Evaluation System Manual
2-6.
"UART Port" on page
2-8.
2-8.