Default Configuration - Analog Devices EZ-Board ADSP-21489 Manual

• USB driver files
• Example programs
• Universal 5.0V DC power supply
• 3.5 mm stereo headphones
• 6-foot RCA audio cable
• 6-foot 3.5 mm/RCA x 2 Y-cable
• 3.5 mm stereo female to RCA male Y-cable
Contact the vendor where you purchased your EZ-Board or contact Ana-
log Devices, Inc. If any item is missing.

Default Configuration

The EZ-Board evaluation system contains ESD (electrostatic discharge) sen-
sitive devices. Electrostatic charges readily accumulate on the human body
and equipment and can discharge without detection. Permanent damage may
occur on devices subjected to high-energy discharges. Proper ESD precau-
tions are recommended to avoid performance degradation or loss of function-
ality. Store unused EZ-Boards in the protective shipping package.
The ADSP-21489 EZ-Board board is designed to run outside your per-
sonal computer as a stand-alone unit. You do not have to open your
computer case.
When removing the EZ-Board from the package, handle the board care-
fully to avoid the discharge of static electricity, which can damage some
components. Figure 1-1
ADSP-21489 EZ-Board Evaluation System Manual
Using ADSP-21489 EZ-Board
shows the default jumper and switch settings,
1-3