Package Contents; Default Configuration - Analog Devices ADSP-SC573 EZ-KIT Manual

• UART
• TWI
• TMR
• GPIO
•
RESET
•
/3.3V/5V output
GND
• External power supply
• CE compliant
• 12V @1.5 Amps
• Power measurement
• 0.051-ohm resistors for measuring current draw

Package Contents

Your ADSP-SC573 EZ-KIT package contains the following items.
• ADSP-SC573 EZ-KIT board
• Universal 12V DC power supply
• USB 2.0 type A to micro-B cable
• USB A receptacle to micro A plug
• Ethernet Cable
• SD Memory Card
• ICE-1000 emulator
Contact the vendor where you purchased your ADSP-SC573 EZ-KIT or contact Analog Devices, Inc. if any item is
missing.

Default Configuration

The ADSP-SC573 EZ-KIT board is designed to run as a standalone unit.
The Default Hardware Setup figure shows the default settings for jumpers and switches and the location of the
jumpers, switches, connectors, and LEDs. Confirm that your board is in the default configuration before using the
board.
®
ADSP-SC573 EZ-KIT Manual
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
Package Contents
2–3