Table of Contents
Advertisement
• CNT0-3
•
RESET
•
GND
/3.3V/5V output
• External power supply
• CE compliant
• 5V @3.6 Amps
• Power measurement
• 0.051-ohm resistors for measuring current draw
Package Contents
Your ADSP-CM419F EZ-KIT
• ADSP-CM419F EZ-KIT
• Universal 5V DC power supply
• USB 2.0 type A to mini-B cable
• J-Link Lite emulator
Contact the vendor where you purchased your EZ-KIT or contact Analog Devices, Inc. if any item is missing.
Default Configuration
The ADSP-CM419F EZ-KIT
The Default Hardware Setup figure shows the default settings for jumpers and switches and the location of the
jumpers, switches, connectors, and LEDs. Confirm that your board is in the default configuration before using the
board.
®
ADSP-CM419F EZ-KIT
Manual
®
package contains the following items.
®
board
®
board is designed to run as a standalone unit.
Package Contents
2–3
Advertisement
Table of Contents
Need help?
Do you have a question about the ADSP-CM419F EZ-KIT and is the answer not in the manual?
Questions and answers