Default Configuration - Analog Devices ADSP-21369 EZ-KIT Lite Manual

• 3.5 mm stereo headphones
• 6-foot RCA audio cable
• 6-foot 3.5 mm/RCA x 2 Y-cable
If any item is missing, contact the vendor where you purchased your
EZ-KIT Lite or contact Analog Devices, Inc.

Default Configuration

The EZ-KIT Lite evaluation system contains ESD (electrostatic dis-
charge) sensitive devices. Electrostatic charges readily accumulate on the
human body and equipment and can discharge without detection. Perma-
nent damage may occur on devices subjected to high-energy discharges.
Proper ESD precautions are recommended to avoid performance degrada-
tion or loss of functionality. Store unused EZ-KIT Lite boards in the pro-
tective shipping package.
The ADSP-21369 EZ-KIT Lite board is designed to run outside your per-
sonal computer as a standalone unit. You do not have to open your
computer case.
When removing the EZ-KIT Lite board from the package, handle the
board carefully to avoid the discharge of static electricity, which may dam-
age some components.
switch, connector locations, and LEDs used in installation. Confirm that
your board is set up in the default configuration before continuing.
ADSP-21369 EZ-KIT Lite Evaluation System Manual
Using the ADSP-21369 EZ-KIT Lite
Figure 1-1 shows the default jumper settings, DIP
1-3