Telephone Connections - Netopia 435 Reference Manual

8-2 Netopia ISDN Router Reference Guide

Telephone Connections

To configure telephone connections, select Telephone Setup in the
Advanced Configuration screen and press Return to go to the
Telephone Connections Screen.
Inbound:
Directory Number 1 Connection:
Directory Number 2 Connection:
Outbound:
Phone 1 Connection:
Phone 1 Service Grade:
Phone 2 Connection:
Phone 2 Service Grade:
Return/Enter for connection list.
Connect incoming calls and outgoing calls.
The screen is divided into two parts, Inbound and Outbound.
The Inbound portion of the Telephone Connections screen specifies
how an incoming speech call is to be directed through the Router.
An incoming call may enter the Router by way of one of the two
directory numbers. (For information on configuring the directory
numbers refer to Chapter 2, ISDN Line Configuration. The
configuration is performed separately for each directory number.)
The call can be routed to the phone jacks or used internally by the
Router itself, or it can be blocked.
The Outbound portion of the Telephone Connections screen
specifies how a call from a given phone jack is sent out of the
Router. It identifies which directory number and what kind of
transmission service to use.
Telephone Connections
Phone 1
Phone 2
Either
Speech
Either
Speech