Netopia 435 Reference Manual page 112

Filter Name---------------------Forward
Filter 1
Filter 2
<<NO MATCH>>
Return accepts * Tab toggles * ESC cancels.
Set whether filters forward or drop matching packets here.
Select a filter and toggle the entry forwarding action to Yes
(pass) or No (discard).
3. To add a filter to the filter set, select Append Filter to display a
table of filters. Select a filter from the table and press Return to
add it to the filter set. The default action of newly added filters
is to not forward (discard) packet entries that match their
criteria.
To exit the table without adding the filter, press the Escape key.
4. To remove a filter from the filter set, select Detach Filter to
display a table of appended filters. Select a filter from the table
and press Return to remove it from the set. To exit the table
without removing the filter, press the Escape key.
5. Select ADD FILTER SET NOW to save the current filter set.
Select CANCEL to exit the Add SAP Filter Set screen without
saving the new filter set.
Deleting a SAP filter set
To delete a SAP filter set, select Delete IPX SAP Filter Set in the IPX
Filters and Filter Sets screen to display a list of filter sets. Select a
filter set from the list and press Return to delete it. Press the
Escape key to exit the list without deleting the filter set.
Show Filters/Change Actions on Match
IPX Setup 5-21
No
No
Yes