Netopia 435 Reference Manual page 35

2-20 Netopia ISDN Router Reference Guide
connection profile.
Dial...
Dial On Demand:
Initiate Data Service...
Callback:
Idle Timeout (seconds):
Return/Enter to allow dialing out, dialing in, or both. In this Screen
you configure options for the way you will establish a link.
Select Dial and decide whether this connection profile will only
make calls, only receive calls, or do both. Choose from In Only
(receive calls), Out Only (make calls), or Dial In/Out (receive
and make calls).
Select Dial On Demand and toggle it to No to only be able to
make manual connections with this profile. The default for Dial
On Demand is Yes, which is correct for most uses. When Dial
On Demand is set to Yes, it allows the Netopia ISDN Router to
automatically make calls as the need arises, such as when a
request to connect to a host on the Internet is made by a
computer on the local network. Dial on demand also comes into
action when IP and/or IPX traffic needs to go to a route defined
by the profile attributes. Every dial on demand profile becomes
a part of the routing table. For more information see
establishing connections" on page 2-40
about manual connections.
Telco Options
Dial In/Out
Yes
64 kb/sec
No
300
"Manually
for more information