Netopia 435 Reference Manual page 200

Message
Resolving host name
Can't resolve host name
Pinging
Complete
Cancelled by user
Destination unreachable from
w.x.y.z
Couldn't allocate packet buffer
Couldn't open ICMP port
5. Select START PING and press Return to begin the Ping test.
While the test is running, the START PING item becomes STOP
PING. To manually stop the Ping test, select STOP PING and
press Return or the Escape key.
While the Ping test is running, and when it is over, a status field and
a number of statistical items are active on the screen. These are
described below.
Status: The current status of the Ping test. This item can display
the following messages:
Finding the IP address for the domain name-style address
IP address can't be found for the domain name-style name
Ping test is in progress
Ping test was completed
Ping test was cancelled manually
Ping test was able to reach the router with IP address
w.x.y.z, which reported that the test could not reach the
final destination
Couldn't proceed with Ping test; try again or reset system
Couldn't proceed with Ping test; try again or reset system
Packets Out: The number of packets sent by the Ping test.
Packets In: The number of return packets received from the target
host. To be considered "on time," return packets are expected back
before the next packet in the sequence of Ping packets is sent. A
count of the number of late packets appears in parentheses to the
right of the Packets In count.
Utilities and Tests
Description
10-7