Table of Contents
Advertisement
10-10 Netopia ISDN Router Reference Guide
Baud Rate...
Bits per Character...
Stop Bits...
Parity...
SET CONFIG NOW
Follow these steps to change a parameter's value:
1.
Select the parameter you want to change.
2.
Select a new value for the parameter. Return to step 1 if you
want to configure another parameter.
3.
Select SET CONFIG NOW to save the new parameter settings.
Select CANCEL to leave the parameters unchanged and exit
the Console Configuration screen.
XMODEM
You can transfer configuration and firmware files with XMODEM
through the Netopia ISDN Router's console or PC Card (PCMCIA)
port.
To go to the PC Card Config/Firmware Transfer screen, select
PC Card Config/Firmware Transfer in the Advanced Configuration
screen.
Console Configuration
9600
8
1
No Parity
CANCEL
Advertisement
Table of Contents
