Static Routes - Netopia 435 Reference Manual

Corporate Models
following section.

Static routes

Static routes are IP routes that are maintained manually. Each static
route acts as a pointer that tells the Netopia ISDN Router how to
reach a particular network. However, static routes are used only if
they appear in the IP routing table, which contains all of the routes
used by the Netopia ISDN Router (see
page 9-10).
Static routes are helpful in situations where a route to a network
must be used and other means of finding the route are unavailable.
For example, static routes are useful when you cannot rely on RIP.
To go to the Static Routes screen, select the Static Routes item in
the IP Setup screen.
Configure/View/Delete Static Routes from this and the following Screens.
Viewing static routes
To display a view-only table of static routes, select Show Static
Routes in the Static Routes screen.
"IP routing table" on
Static Routes
Show Static Routes...
Add Static Route...
Change Static Route...
Delete Static Route...
IP Setup 4-13