Netopia 435 Reference Manual page 24

Initial naming and
activation of the
connection profile
IP configuration
parameters
Adding a connection profile
To add a new connection profile, select Add Connection Profile in
the Connection Profiles screen.
Profile Name:
Profile Enabled:
IP Enabled:
IP Profile Parameters...
IPX Enabled:
Number to Dial:
Optional 2nd Number to Dial:
PPP/MP Options...
Telco Options...
Calling Number:
ADD PROFILE NOW
Select Profile Name. Enter a name for the profile. For example,
if this profile is for connecting to an Internet Service Provider
(ISP), you may want to enter the ISP's name here.
Select Profile Enabled and toggle it to Yes to activate the
profile.
Select IP Enabled and toggle it to yes or no depending on
whether you will be using TCP/IP over your ISDN connection.
This is the most common usage, and TCP/IP is required for an
Internet connection.
Configuring ISDN Connections
Add Connection Profile
Profile 03
Yes
Yes
No
CANCEL
2-9